Deployment of Managing Points and Checking Points in TQM - Mechstudytips

By -

 Deployment of Managing Points and Checking Points:

As stated earlier, the Managing Points which are the functional objectives of HOD are derived from the expectations of internal and external customers. Checking Points are derived from the functional strategies. The subordinates(or) the functional heads inherit the Checking Points of their Boss (HOD) as their own individual objectives and execute them on an hourly/ Daily /weekly basis. By executing the strategies of the HOD, the subordinates HOD to achieve his / her Managing Points.

Thus, the Managing Points and Checking Points of HOD are deployed as Individual objectives and Individual actions points of the subordinates.

Comments

Post a Comment

Popular posts from this blog

What is SOC and HTA ? - Mechstudytips

By -
SOC and HTA What is SOC? SOC -   Source Of Contamination What is HTA? HTA - Hard To Access What are the steps for SOC and HTA Mapping? 1. Draw the full machine layout 2. Do 5S in all machines 3. Record the issues in Fugai tags (Leaking, Uncleanable places) 4. Mark the issues in layout What are the benefits of SOC and HTA Mapping? 1. Leaky place identification 2. Cleaner machine 3. No breakdowns
Read more

What is 5S audit check sheet and how to create ? - Mechstudytips

By -
Image
5S audit check sheet  5S audit check sheets are used to confirm the 5S level and improvement in your workplace. Checkpoints may vary based on the workplace. So here we will see the guideline for how to create a 5S check sheet. Steps to create 5S audit check sheet, 1. First, go to the real workplace 2. Check  and capture what are the things used to do the work like a machine, computer, table, tools, etc 3. Check what are the standards followed in the place 4. Keep 5's in your mind and take a plain A4 paper 5. Make 5 S as a separate column as Seiri, Seiton, Etc., 6. Every column must have 5 points each, so that put together it will come 20 and each point have score range 1 - 5 ( 1 - Poor, 2 - Fair, 3- Good, 4 - Excellent, 5- Outstanding) 6. Write down the points Seiri column which is about unwanted things removal ( eg: Removal of unwanted materials) 7. Like that write down the points for other 4 S based on the reality to improve 8.
Read more

What is Red ,White and Green fugai tags in 5S? - Mechstudytips

By -
Red/White/Green fugaiTag in 5S Fugai Tag is the tool to capture the issues in a place / in machine. Fugai means Improved White tag   - Problem can be corrected by an identified person itself Red Tag     - Support required from other function Green tag - Same as a red tag, but this is used to capture safety-related issues The tag shall contain, 1. Tag.No   and Date 2. Area Name 3. Area code 4. Problem Description 5. Type of defect  6. Explain the problem 7. Identified by  8. Verified by 9. Corrective action with Date 10. Corrective action verified by
Read more